TECHNICALDATA
Power supplyvoltage; current:
230/110(115)VAC (50/60Hz); 0.5/1.2A(230/110VAC)
Ignition HT transformers:input, output,weight, dimensions:
–P/N TX-230-8000input: 230 VACat0.5A; output: 8000 VAC, 15 mA, 100% duty cycle
–P/N TX-110-8000input: 110/115 VACat1.2A;output: 8000 VAC, 15 mA, 100% duty cycle
weight, dimensions:1.8kg, LxWxD 107x87x64
Methodof operation:
electrical arc
Ignition controlsignal:
24VDC, max.12A (20A peak)
Availablerod insertionlengthL1:
0.65 ÷ 3.15 m
Rodsand tipsouterdiameter, material:
Ø16 mm, 316 SS
Rods optimal electrical operation parameters:
15-20 mA at 7,500–10,000 V
Rods and tips:operatingtemperature, IPrating, weight:
–P/N HTSS-xxx-J -40°C÷+100°C, IP67 (j. box), +200°C rod tube;L1=0.65 m-0.77 kg
–P/N HTSS-xxx-CEX -40°C÷+80°C, IP66 (cable entry), +200°C rod tube;L1=0.65 m-1.00 kg
–P/N HTSS-xxx-J-CEX -40°C÷+80°C, IP66 (j. box), +200°C rod tube;L1=0.65 m-1.73 kgrods weight adder:approx. 0.44 kg / meter
–Tip P/N HTR-TIPlength 160 mm, 0.16 kg; caution:used on rods lengths L=0.5, 0.6, 0.7 only
–Tip P/NHTR-TIP-Llength 460 mm, 0.32kg
tip operating temperature:+300°C tip continuously, over +1,000°C in flame for short period central Kanthal electrode over +1,000°C continuously
Power packs:
operatingtemperature, IPrating, weight, material:
–P/N HTSS-PP-230/110-40°C÷+65°C, IP66, 6 kg; C. Steel powder-coated or option S. Steel
–P/N HTSS-PP-230/110-CEX-40°C÷+65°C, IP66, 20 kg;Cast Alum.powder-coated or option S. Steel
HVignition single wire cable data:
–P/N HT-CAB-5:type FZ-LSi, OD 7 mm, 15kV, wire 1.0 mm², oper. temp.: -50 +180°C
–P/N HT-CAB -5-CEX: type FZ-LSIekw, shielded, OD 8 mm, 15kV, wire 1.0 mm², oper. temp.: -50 +180°C
–P/N HT-CAB-5 and HT-CAB-5-CEX (5 m working length)weight: 0.37 kg and 0.42.
Flame monitoring (in case of S&S mode used): MBCE-110/230FR flame rod module:
–operation mode: continuous
–functional safety: suitable for installations up to and including SIL2(Exida’s FMEDA report)
Power supplyvoltage; current:
230/110(115)VAC (50/60Hz); 0.5/1.2A(230/110VAC)
Ignition HT transformers:input, output,weight, dimensions:
–P/N TX-230-8000input: 230 VACat0.5A; output: 8000 VAC, 15 mA, 100% duty cycle
–P/N TX-110-8000input: 110/115 VACat1.2A;output: 8000 VAC, 15 mA, 100% duty cycle
weight, dimensions:1.8kg, LxWxD 107x87x64
Methodof operation:
electrical arc
Ignition controlsignal:
24VDC, max.12A (20A peak)
Availablerod insertionlengthL1:
0.65 ÷ 3.15 m
Rodsand tipsouterdiameter, material:
Ø16 mm, 316 SS
Rods optimal electrical operation parameters:
15-20 mA at 7,500–10,000 V
Rods and tips:operatingtemperature, IPrating, weight:
–P/N HTSS-xxx-J -40°C÷+100°C, IP67 (j. box), +200°C rod tube;L1=0.65 m-0.77 kg
–P/N HTSS-xxx-CEX -40°C÷+80°C, IP66 (cable entry), +200°C rod tube;L1=0.65 m-1.00 kg
–P/N HTSS-xxx-J-CEX -40°C÷+80°C, IP66 (j. box), +200°C rod tube;L1=0.65 m-1.73 kgrods weight adder:approx. 0.44 kg / meter
–Tip P/N HTR-TIPlength 160 mm, 0.16 kg; caution:used on rods lengths L=0.5, 0.6, 0.7 only
–Tip P/NHTR-TIP-Llength 460 mm, 0.32kg
tip operating temperature:+300°C tip continuously, over +1,000°C in flame for short period central Kanthal electrode over +1,000°C continuously
Power packs:
operatingtemperature, IPrating, weight, material:
–P/N HTSS-PP-230/110-40°C÷+65°C, IP66, 6 kg; C. Steel powder-coated or option S. Steel
–P/N HTSS-PP-230/110-CEX-40°C÷+65°C, IP66, 20 kg;Cast Alum.powder-coated or option S. Steel
HVignition single wire cable data:
–P/N HT-CAB-5:type FZ-LSi, OD 7 mm, 15kV, wire 1.0 mm², oper. temp.: -50 +180°C
–P/N HT-CAB -5-CEX: type FZ-LSIekw, shielded, OD 8 mm, 15kV, wire 1.0 mm², oper. temp.: -50 +180°C
–P/N HT-CAB-5 and HT-CAB-5-CEX (5 m working length)weight: 0.37 kg and 0.42.
Flame monitoring (in case of S&S mode used): MBCE-110/230FR flame rod module:
–operation mode: continuous
–functional safety: suitable for installations up to and including SIL2(Exida’s FMEDA report)